Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1The blocks are configured as:• A (1-4)• B (5-8)• C (9-12)• D (13-16)• E (17-20)• F (21-24)• G (25-28)The output can be muted by clicking next to the required output in theMute column (a red letter M will indicate when the mute is on).W/Len represents the word length of the signal from that output.The options are 16, 20 and 24.Sync• Auto• Auto Low• Internal• Auto HighThis sets the system sync.With either of the Auto options selected, then the system willautomatically select and display the highest priority valid clock sourcefound.Frequency• 44.1 kHz• 48 kHz• 88.2 kHz• 96 kHz• PulldownSets the sample rate for the whole system.Priority Sync• AES• Wordclock• MADIMisc Options• Channel 55 Control• Wordclock Termination• Sync OutCopy To AllWith this option ticked, setting one value in any column will change all ofthe other inputs/outputs to that value as well.NB: This function only copies parameters on the current rack and not toother racks that may be connected.An asterisk at the end of the file name in the title bar, indicates thatchanges have been made to the current setup and these changes have yetto be saved.- 134 -