Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1Opens the Load Options screen, so the various parameters for loading apass can be set.With this icon turned on, the selected pass will be loaded without:• the Safety Snapshot• Gangs• Links• Automation ModesLoads the last loaded Mix Pass so an A/B comparison can be made.Allows you to Delete and Prune the mix tree by opening the Edit Treescreen, but will require that Automation is turned off.Finds any subtree that may have been created in the current tree.The adjacent display box will show the name of the subtree mix once ithas been selected.Disk Space Status WarningThe look of this screen will change depending on whether your hardwarehas FilerX with a Multilink adaptor or an SPS drive.Regardless of the hardware considerations, it is advisable to set thiswarning to be no more than 85%, as Encore needs at least 15% slack torun the automation efficiently.Once the drive reaches this limit, warnings will be displayed every timeyou attempt to create a New Mix or Save & Load a Mix Setup.Should you continually ignore the warnings as they are presented,the drive will eventually become too full to write to.Mix/Pass Tree OptionsBackground ColourAllows you to select the background colour for the Mix/Pass tree displayscreen.New Mix NameIn the Filing page when a new mix is created, this is the text that will beused (with the addition of the next available pass number) when the Nextbutton is pressed.Auto Recovery OptionsWhat happens in the event of the system being shutdown with automationdata still held in RAM.These three options are self-explanatory.- 62 -