Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1The list of snapshots will be cleared.> To save changes to the current Snapshot file Click the Save button.The progress bargraph at the bottom of the dialogue box will indicatewhen the save is complete.To save the current Snapshots in a new file> Click the Save As button.The Snapshot Filing dialogue box will be displayed.> Click in the Snapshots box, and type in the required file name.> Click the Save button.The current Snapshots will be saved to the hard disk as the named file.(If the Save On Exit box is checked, then changes will be savedautomatically each time you exit Snapshot mode, providing the file hasbeen given a file name).To overwrite a Snapshot file with the current list> Click the Save As button, and the Snapshot Filing dialogue box will bedisplayed.Click the required file name in the list of available Snapshots.> Click the Save button.A confirmation dialogue box will be displayed to indicate that the file willbe replaced.> Click Yes.The current Snapshots will be saved to the selected file name.To delete a file of Snapshots> Click the Save As button.The Snapshot Filing dialogue box will be displayed.> Click on the file name to be deleted in the Available Snapshots list, andclick the Delete button.A confirmation dialogue box will be displayed.> Click Yes.The selected file will be removed from the list of Available Snapshots.(Click the Cancel button to return to the Snapshot System dialogue box).To rename a file of Snapshots> Click the Save As button.The Snapshot Filing dialogue box will be displayed.> Click on the file name to be renamed in the available Snapshots list.> Click the Rename button.A dialogue box will be displayed for entering the name.> Type the new name and press Enter.The new file name will be shown in the Available Snapshots list.Click the Cancel button to return to the Snapshot System dialogue box.- 201 -