Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1Reset Wizard> To reset controls on the console surface to the settings in DefaultsManager click the Reset Wizard button.This is useful for flattening EQs, resetting a range of faders to 0dB etc.The Paths page of the Reset Wizard will appear.> Using the Path Type radio buttons and the list of available paths, selectthe paths you wish to reset controls on (a selection of paths can behighlighted using click and drag).> When the selection has been made, click Yes.The Controls page of the Reset Wizard will appear.> Tick the controls to be reset and click Next.The selected paths will have the selected controls reset to the currentdefault values.> Once the user has set or captured the correct controls, this file can thenbe saved like any other file type, and linked to the current desk setup.NB: Loading a Defaults file when the Mix Setup is loaded does not automatically reset any controls inthe current mix setup to the values in the Defaults file.- 144 -