Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1> Select the required file, and click the Read Only button.A dialogue box will be displayed to confirm changing the Read Onlystatus.> Click OK.The same process is used to un-mark the file.> Select a Read-Only file and click the Read Only button.The Linked tickbox ensures that all System files linked to the Mix Setupwill also be made Read Only.Force Desk KeepThis has the same effect as pressing Keep Desk on the console surface.Calibrate Faders (Analogue)The faders are calibrated when the console is first booted.It is advisable to calibrate the faders periodically, and they should alwaysbe calibrated if any of the faders are changed.It is also possible for the faders to become misaligned.For instance, if an obstacle is left in the way of a few faders when theconsole is starting up then those faders may not move to the full extent ofthe travel on the fader bed.This may cause the affected faders to become misaligned and may alsocause the faders to freeze in position.Other problems or misuse can also cause the faders to freeze in position.A fader calibration is performed to attempt to cure any fader problems.> To calibrate the faders, select Calibrate Faders from the menu, andthe faders will be recalibrated immediately.There is no confirmation dialogue box.There may be situations when this does not cure the problemIf repeated attempts to re-calibrate the faders are unsuccessful then itwill be necessary to re-boot the console.Flying Faders Preferences (Analogue)This will select default Flying Faders preferences to enable familiarity ofoperation.> To set, select from the menu then confirm using the dialogue box.When timecode is stopped, the following options will be applied to thefollowing parts of the automation system:• Fader Lock Record - Auto Join• Fader Touch Record - Trim To End• Mutes - Auto Join• Channel Events - Auto Join- 39 -