Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1Automation MenuNew ISSAllows you to create a new static Initial Snapshot from the state of thecontrols currently on the console surface.The new ISS will stem directly from the root of the tree, and will be giventhe next available pass number.All dynamic automation will be removed from this pass.There is no limit to the number of new ISSs that can be created on a tree.Load OptionsThese settings affect what happens when a Mix/Pass revision is loaded.Restore Safety SnapshotDetermines whether or not the Safety Snapshot is loaded (this is thestatic snapshot of the state of all controls at the point where Play waspressed).ModesDetermines whether or not the Automation Modes of controls are loaded.LinksDetermines if control Links will be restoredGangsDetermines if fader Gangs will be restored.These can be either on or off, and will remember their last state whenlaunched again.Label optionsLoad Labels: Loads the labels from the selected mix/pass.Keep Current Labels: Will keep any labels currently displayed and ignorethose in the selected mix/pass.Clear Labels: Clears all labels and starts with a blank label list.Merge Labels: Combines any existing Labels with the labels being loadedin the Mix Tree to form one list (if Renumber List On Merge is ticked,then when both sets of labels are merged, they will be renumbered andtime-ordered).If Display Options For Each Load is ticked, then you will see the LoadOptions screen every time you attempt to load a pass.Otherwise the pass will be loaded taking into consideration the state ofthese tickboxes the last time they were set.- 41 -