Applied Biosystems 7900HT Fast Real-Time PCR System and SDS ...

Running a Single Plate (Using the SDS Software)Running a Single Plate (Using the SDS Software)User AccessRequirementRunning the PlateThere is no access requirement. All users can run plates that have been saved to theSDS Enterprise Database.1. In the SDS software, select the Instrument tab of the plate document.2. In the Real-Time or Plate-Read tab of the Instrument tab, click .The instrument tray rotates to the OUT position.3. Place the prepared optical plate or Low Density Array into the instrument trayas shown below.Before loading the plate or Low Density Array onto the instrument tray, makesure that:• The associated plate document is open in the SDS software.• The optical plate or Low Density Array has been sealed.Well A1Notched cornerBar codeWell A1Notched cornerBar codeIMPORTANT! The A1 position is located in the top-left side of the instrument.Applied Biosystems 7900HT Fast Real-Time PCR System and SDS Enterprise Database User Guide 4-25DRAFTSeptember 1, 2004 11:39 am, CH_Basic.fm