Applied Biosystems 7900HT Fast Real-Time PCR System and SDS ...

Connecting SDS Software to the DatabaseReconfiguring theDatabaseConnectionIMPORTANT! You must have Administrative privileges to reconfigure the SDSEnterprise Database connection (see the SDS Enterprise Database for the AppliedBiosystems 7900HT Fast Real-Time PCR System Administrators Guide for moreinformation on user accounts).The connection to the SDS Enterprise Database can be reconfigured from theOptions dialog box of the SDS software as explained below.1. Start the SDS software (see page 2-7 for more information).2. In the Login dialog box, enter a user name and password of a user account thatbelongs to the Administrator user group.3. Select Tools > Options.4. In the Options dialog box, select the Database tab.5. Configure the Current Selected Connection settings:Host Name fieldEnter the host name orIP address of the databasePort Number fieldEnter the port number of thedatabase connection(default is 1521)Service Name fieldEnter the name of the database(default is SDS22)6. Test the new connection:a. Click to test the new connection.The software briefly checks that a database is at the given IP address. If theconnection is successful, the software displays the Login dialog box.b. In the Test Login dialog box, enter your User Name and Password, thenclick .• If the SDS software is unable to successfully connect to the database, thesoftware displays the error message shown below.7. In the Options dialog box, click .Applied Biosystems 7900HT Fast Real-Time PCR System and SDS Enterprise Database User Guide A-23DRAFTSeptember 1, 2004 11:39 am, App_SWReference.fm