SAP Basis

ADM100 Test Your Knowledge
109
Test Your Knowledge
1. In which sequence are the system parameters read from the specified
locations by the system?
Choose the correct answer(s).
A 1. Instance profile 2. Default profile 3. Kernel
B 1. start.ini 2. Kernel 2. Default profile 4. Instance profile
C 1. Kernel 2. Default profile 3. Instance profile
D 1. Kernel 2. start.ini 3. Default profile 4. Instance profile
2. In which profile can you change the number of background work
processes?
Choose the correct answer(s).
A Start profile
B Default profile
C Background profile
D Instance profile
3. You can use transaction RZ10 RZ10 to check the consistency of
individual profiles.
Fill in the blanks to complete the sentence.
4. In which sequence should you perform the listed steps when setting
up operation modes?
Choose the correct answer(s).
A 1. Create operation modes 2. Assign instances 3. Distribute
work processes 4. Maintain time table
B 1. Create operation modes 2. Maintain time table 3.
Distribute work processes 4. Assign instances
C 1. Create operation modes 2. Distribute work processes 3.
Maintain time table 4. Assign instances
2003/Q3 © 2003 SAP AG. All rights reserved. 123