SAP Basis

Unit 15: Structured Troubleshooting ADM100
2. Perform another front end print with immediate output. Print the
output of transaction SM51.
3. Analyze the error. To do this, compare the trace information and
the information from transaction SP01 with the information for the
successful front end print from the previous task.
4. Correct the error as described in the solution and perform another
front end print.
5. End your SAPLPD.
Caution: Ending SAPLPD is necessary for the next task. Do
not reset any of the trace files, but rather use the opportunity
to compare the trace files for erroneous front end print
processes with those of an error-free front end print process.
Task 4 Example 2 (Optional):
Port is occupied.
1. Switch to the directory g:\Additional_Files\ADM100 .Inthe
saprouter directory, open a command prompt. Start saprouter with the
following call for the DEV group: saprouter -r -S 516 or with
the following call for the QAS group: saprouter -r -S 517
2. Perform another front end print.
3. Analyze the error. To do this, compare the trace information and
the information from transaction SP01 with the information for the
successful front end print from the previous task.
4. Correct the error as described in the solution and perform another
front end print.
570 © 2003 SAP AG. All rights reserved. 2003/Q3