SAP Basis

ADM100 Lesson: Appendix - Troubleshooting Example
Figure 174: Process of Front End Printing 2
If all traces are activated, you can perform a test print with the front end
printer (that you copied for the test) (the figure “Process of Front End
Printing 2” shows the process of the front end printing and the places in
which trace information is written). Since errors can, of course, also be
user-dependent, the test should be performed under the user with which
theproblemshaveoccurred.
Inthefirstapproach,wedescribeanerror-freeprintprocess,whichcan
then be used as a guide for troubleshooting.
Error-Free Front End Printing
We perform an error-free front end print with the additional activated
trace information. We use this trace information when analyzing errors for
comparison purposes and to isolate the problem.
2003/Q3 © 2003 SAP AG. All rights reserved. 559