SAP Basis

ADM100 Lesson: Configuring Printers in SAP Systems
B) Use the instructor’s host as the destination host. In this case, however,
the participants cannot display the output.
Caution: saplpd must be started at operating system level on
the destination host.
1. Create a remote printer Remote##in the SAP system that calls a
remote printer that the instructor specifies.
a) Theprocedureisthesameasforthepreviousexercise,but
with different values. Your instructor will give you the exact
information (host name, printer name, access method).
2. Output any list with immediate printing on the printer Remote##.
a) You can change your user defaults by choosing System → User
Profile → Own Data (transaction SU3). Check the Immediate
Output field on the Defaults tab page.
3. Check your output.
a) Due to the setting made in task 2, print time Output Immediately
is now the default value. The user can make this (and other)
settings in the print dialog box by choosing Properties.
Hint: By choosing Show selected print parameters on initial
screen on the Properties window, you can maintain some
parameters directly on the print dialog box in future.
Continued on next page
2003/Q3 © 2003 SAP AG. All rights reserved. 375