04.06.2013 Views

UCS 2.4 - Univention

UCS 2.4 - Univention

UCS 2.4 - Univention

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

4.5 <strong>Univention</strong> Directory Manager modules<br />

Values presently edited - and therefore not accessible for search - are locked during editing in order to<br />

ensure that these values are not used a second time. Such values are reserved for the editing process<br />

and cannot be utilised by any other process. Once editing is finished, the lock is lifted.<br />

In case of an error, a lock can sometimes persist by accident. To ensure an error-free operation, <strong>Univention</strong><br />

Directory Manager automatically releases locked values after a maximum locking time (five minutes).<br />

Locked values are stored in the appropriate containers beneath the temporary container, and are checked<br />

and, eventually, deleted in <strong>Univention</strong> Directory Manager like any other objects. Manual deleting is not<br />

recommended except in special cases:<br />

• If, due to an error, the lock was not lifted, and the value is to be used again before the locking time<br />

is expired. In such a case, it has to be ensured that the persistence of the lock is indeed due to an<br />

error, and not just to the fact that another process has made access to the value in the meantime.<br />

• The lock was lifted, yet the locked object was not automatically removed from<br />

cn=,cn=temporary,cn=univention,. Such objects do not disturb<br />

the program flow, they will be overwritten by <strong>Univention</strong> Directory Manager as soon as the necessity<br />

arises.<br />

’General’ tab<br />

Name (*)<br />

The name of the locked object. The name corresponds to the value to be set as the attribute.<br />

Locked until<br />

The time (in seconds), from 1 January 1970 onwards, when the object is automatically released after<br />

the expiry of the maximum locking time.<br />

4.5.12.6 Default values<br />

Certain default values can be set in the default object.<br />

’General’ tab<br />

Name (*)<br />

The name of the object. The name is fixed and cannot be changed so the box is shown in grey.<br />

’Primary groups’ tab<br />

Default values for the primary groups of different object types can be set on this tab.<br />

’Default Primary Group’ tab<br />

A default value for the primary group of users, which should be entered in advance when adding a<br />

133

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!