Expression 3 - ETC

Recording a cue with a single fade time
Unless you tell it otherwise, the console assigns default fade times to any
cue you record. If you prefer, you may record cues with custom fade
times instead.
Fade times can be zero seconds to 99:59 minutes long. They may be
expressed in minutes and seconds, or as fractions of seconds (in decimal
format). Acceptable time values include: 0.2 (.2 seconds), 00:12
(12 seconds), 5.5 (5.5 seconds), or 5:30 (five minutes, 30 seconds).
Follow these steps to record a cue with a custom fade time:
Keystrokes:
Action:
1. Press [Stage] or [Blind]. Selects display mode
2. Press [Cue]. Prompt reads:
Select cue number
To select cue type, press TYPE
3. Press [3]. Selects cue 3
4. Press [Time]. Prompt reads:
Enter upfade time
5. Press [8]. Enters a fade time of 8 seconds.
Corner reads: UpTime 8
6. Press [Enter] [Enter]. Enters matching downfade time
7. Press [Record]. a
Prompt reads:
To record cue, select number and
press ENTER
To cancel, press CLEAR
8. Press [Enter]. Records cue 3 with fade time of eight
seconds
a. If the cue already exists, you may omit steps 7 and 8.
Expression 3 User Manual, v.3.1 91