Expression 3 - ETC

Keystrokes:
Action:
1. Press [Setup]. Selects Setup menu
2. Press [6] [Enter]. Selects Options Settings menu
3. Press [3] [Enter]. Prompt reads:
Select DMX512 In starting channel
(Enter 0 to disable)
4. Press [1][0][0] [Enter]. a
a. Make sure you have enough channels to accommodate all
DMX In channels. If your console has 400 channels and you
set the DMX In starting address to 100, only the first 301 DMX
In channels will be available in focus point 0.
Working with DMX In and focus point 0
After enabling DMX In, you can record DMX In levels in the Stage or Fader
displays or you can record all active channels except DMX In. You can
record using focus point 0 or except focus point 0 without first enabling
DMX In.
The following procedure illustrates the use of the DMX In softkey in the
Stage display.
Keystrokes:
Enables DMX In and specifies channel
100 as the first channel to receive DMX
In signals
Action:
1. Press [Stage]. Selects the stage display
2. Press [Record] [5]. Prepare to record to cue 5
3. Press [S7], More
Softkeys, until [S4] reads
DMX In.
4. Press [S4], DMX In,
[Enter]. a
Selects DMX In channels
5. Press [Enter]. Records DMX In levels to cue 5
a. Press [Except] before pressing [S4] in this step to record all
active channels except DMX In channels.
Expression 3 User Manual, v.3.1 295