Expression 3 - ETC

Remote Focus Unit (RFU)
The Remote Focus Unit (RFU) is a small, portable control panel you can
use from a remote location, such as in the house, on your studio set or
from backstage, with or without a remote monitor. You can control most
console functions (not submasters) with an RFU. The console keypad and
RFU are able to operate simultaneously. Changes made from both
console and RFU are displayed immediately on both the console monitor
and the RFU.
❶ Keypad
The keys on the RFU’s keypad function exactly like their counterparts on
the console.
❷ Fader window
The top line displays the next cue on the cue list. The bottom line displays
the cue in the A/B fader on the left and the cue in the C/D fader on the
right.
❸ Cue/channel number window
Displays the currently selected cue, group or submaster
❹ Keypad prompt window
Displays the same prompt that appears in the upper right corner of the
Stage or Blind display.
❺ Power switch
Power is ON in the up position and OFF in the down position. To operate
your installed RFU, move power switch to ON. WARNING: Do not
connect or disconnect the RFU when it is turned on.
For RFU installation instructions see Installing Remote Focus Unit, page
341. For instruction on installing a remote monitor, see Installing remote
video monitors, page 354.
314 Chapter 25 Accessories