Expression 3 - ETC

Clearing regions
You must be in Designer’s Worksheet Editing display mode to clear
individual regions. To clear all regions, you can use the Clear Designer’s
Worksheet option from the Clear Functions menu, as described in
Chapter 22 Clear functions, page 261.
Note: Clearing regions does not affect the macro assigned to the region.
Clearing a region removes it from the digitizer and the Designer’s
Worksheet display, and removes the macro assignment.
To clear regions, follow these steps:
Keystrokes:
Actions:
1. Press [Setup]. Selects Setup display
2. Press [7], Designer’s
Worksheet Editing, and
press [Enter].
Selects Designer’s Worksheet Editing
display mode
3. Press [S6], Clear Region. Prompt reads:
To clear region(s), select region
number(s) and touch ENTER
To cancel, touch CLEAR
4. Press [7]. Selects region 7 to clear
Corner reads:
Region 7
5. Press [Enter]. Prompt reads:
To confirm, touch ENTER
To cancel, touch CLEAR
6. Press [Enter] to clear the
region or [Clear] to cancel
the action.
Clears region 7 from the Designer’s
Worksheet layout; removes the
assignment of macro 7 to region 7
Expression 3 User Manual, v.3.1 319