Expression 3 - ETC

MSC commands transmitted by the console
MIDI Show Control (MSC) allows the console to send the following
commands to MIDI devices. If MSC output is enabled on the console, the
console automatically sends the MSC commands. The console’s
transmitter Device ID must match the device ID for the MIDI device
receiving the signals.
[A/B Go]
[C/D Go]
• If a cue is pending, the console transmits [A/B Go]
with cue number and a list entry of 1.
• If a cue is holding, the console transmits [A/B
Resume] with cue number and a list entry of 1.
• If a cue is pending, the console transmits [C/D Go]
with cue number and a list entry of 2.
• If a cue is holding, the console transmits [C/D
Resume] with cue number and a list entry of 2.
[A/B Hold] • If a cue is running, the console transmits [A/B Stop]
with cue number and a list entry of 1.
[C/D Hold] • If a cue is running, the console transmits [C/D Stop]
with cue number and a list entry of 2.
Macros • For macros 1-127, the console transmits Fire with
the macro number.
Expression 3 User Manual, v.3.1 285