Expression 3 - ETC

Adding grouped channels
The procedure for creating steps in the Blind Effects display by adding
grouped channels from cues or submasters to them is shown below. All
channels in a group or focus point are added to the step(s) together but
they may be edited individually later.
Keystrokes:
1. Press [S1], Step, and enter
the step number. A new
step must always have the
next highest number,
beginning with step 1.
2. Press [Group] [Cue] [5]
[Thru] [1][0]. a
3. Press [S8], Add
Channels, [At] [5][0].
Actions:
Specifies next step to be created.
Prompt reads:
Select step number(s)
(To clear step(s), select step
number(s), then press CLEAR)
Selects the channels of cues 5 through
10. Prompt reads:
Group mode - Select focus point(s)
and press ADD CHANNELS to add
to step(s), or press AT to edit
existing channel level(s)
Adds channels to step at level 50
Prompt reads:
Group mode - Select focus point(s)
and press ADD CHANNELS to add
to step(s), or press AT to edit
existing channel level(s)
4. Press [Record] [Enter]. Records the channels to the effect
step. Prompt reads:
Select cue number
To write effect, press STEP
a.
To add grouped submasters rather than grouped cues, press
[Submaster] rather than [Cue] in this step.
Expression 3 User Manual, v.3.1 211