Expression 3 - ETC

About Show
About Show provides you with information about the currently loaded
show. It tells you how many channels and dimmers your show is
configured for and your utilization of recordable entities such as cues,
submasters, groups, focus points, macros and time code events. This is
important because not enough memory is available to store the maximum
number of all recordable entities at the same time.
Use About Show to monitor your memory usage as the complexity of your
show increases. If you fill the available memory, reclaim some of it by
clearing recorded entities that you are no longer using, for example by
reducing how many channels and dimmers are patched.
Press [About] [Enter] to go to the About Show display.
• Label Your show name assigned in the Setup
menu. See Naming the show, page 37.
• Number of channels Shows the value set in the System
Settings menu. See Setting the number
of channels, page 25.
• Number of dimmers Shows the value set in the System
Settings menu. See Setting the number
of dimmers, page 24.
• Recorded Shows how many of each item in the
first column that have been recorded.
• % Memory Shows what percentage of console
memory is consumed for each item in
the Recorded column.
• Remaining Shows how many more of each item in
the first column may be recorded before
reaching the console maximum.
• System setup Shows how much console memory is
used for your setup and configuration
settings.
• Memory left Shows what percentage of console
memory is remaining for your show.
38 Chapter 3 System settings