Expression 3 - ETC

Manual playback
The [Manual Mode], [Pause Mode], and [Step] softkeys allow you to
manually control playback of time code events without a time code source
enabled. Press [Time] to select an event out-of-sequence by specifying its
code time. Use either the Manual Mode or Pause Mode softkeys to
ensure that neither an internal nor an external time code clock can run
events while you are creating or editing a time code program.
.
Keystrokes:
1. Press [S3], Manual Mode
or...
Press [S4], Pause Mode.
2. Press [S5], Step. a
3. Repeat step 4 to advance
sequentially through time
code events.
4. If you are in Manual mode,
press [S3], Manual Mode.
If you are in Pause mode,
press [S4], Pause Mode.
Actions:
Stops the time code input and resets
the console to the first recorded time
code event,
or...
Interrupts time code input at the
current time code event
Advances to the next recorded time
code event,
Returns to normal operation and the
time code resumes
a. In Manual mode, pressing [Step] starts with the first recorded
time code event and proceeds in recorded order. Only one
event is executed each time you press [Step].
310 Chapter 24 Control interfaces