Expression 3 - ETC

Wait times in multipart cues
You can set individual wait times of up to 99:59 minutes for each part of
a multipart cue. The wait time is the delay between when you press [Go]
and when the part begins. If no wait is recorded, all parts run
simultaneously when you press [Go].
Follow these steps to assign a wait time to a part:
Keystrokes:
Action:
1. Press [Cue], then enter the
cue number.
2. Press [Part], then enter the
part number.
Selects cue number
Prompt reads:
Select cue number
Selects part number
Prompt reads:
Select part number
3. Press [Wait] [1][0]. Selects wait time of ten seconds
Prompt reads:
Enter wait time
4. Press [Enter]. Sets wait time for the part to ten
seconds. Part will wait ten seconds,
then run
120 Chapter 9 Multipart cues