Expression 3 - ETC

Setting default Level key
The console allows you to assign a value to the [Level] key. The default
value is 100 percent. You may assign [Level] any value between zero and
100.
Follow these steps to assign a value to [Level]:
Keystrokes:
Action:
1. Press [Setup]. Selects Setup display
2. Select [1], System
Settings, and press
[Enter].
Selects System Settings menu
3. Select [4], Default Level,
and press [Enter].
4. Use the keypad to enter
the two-digit number
(00-99). a
Setting default fader clear time
Prompt reads:
Enter default level
(Press FULL button for 100%)
New default for [Level] is set
a. To enter a level between one and nine percent, you must
precede the number with a zero. You may also press [Level]
or [Full] for the assignment.
The default fader clear time determines the fade time for both [Clear]
keys. Pressing the [Clear] key above one of the fader pairs clears the cue
from the fader, fading all channels in that fader to zero. Channels black out
immediately when clear time is zero.
Fader clear times can be programmed from 0.1 second to 99:59 minutes.
See Setting default fade times, page 26, for information about entering
the time value.
Follow these steps to set a new default fade time. 9
Keystrokes:
Action:
1. Press [Setup]. Selects Setup display
2. Select [1], System
Settings, and press
[Enter].
3. Select [5], Default Fader
Clear Time, and press
[Enter].
4. Press [9] to enter the time
value you wish to assign.
Selects System Settings menu
Prompt reads:
Enter default fader clear time
Corner reads:
Time 9
5. Press [Enter]. New default time is set to nine
seconds
9.
The factory-set default fader clear time is zero seconds.
Expression 3 User Manual, v.3.1 27