Expression 3 - ETC

Stage
The Stage display shows you the current levels of all active channels. Up
to 125 channels appear on the display at a time.
Display name
Keypad corner
Channel
area
Prompt
area
Attribute bar
Softkeys
Blind
Fader
The Blind display lets you work on cues, groups and submasters without
affecting the look on stage. It looks exactly like the Stage display, pictured
above, except some of the softkeys are different 6 and it has Blind for the
Display Name.
The Fader display selectively shows on stage the channel levels by one or
both fader pairs, by background faders or by DMX In. It looks exactly like
the Stage display, pictured above, except some of the softkeys are
different and it has Fader for the Display Name.
Fader displays are unaffected by the Grandmaster or by inhibitive
submasters. The Fader display shows all levels as they would appear if the
Grandmaster and any inhibitive submasters were at Full.
Upon entering the Fader display, you are prompted to select a display
from the five options listed below. You can re-select the display at any
time by pressing [S1], Select Fader.
1. A/B Fader
2. C/D Fader
3. Both Faders
4. Background Channels
5. DMX In
6.
See Appendix E Softkeys, page 361 for a complete tabulation of
console softkeys.
14 Chapter 2 Monitor displays