Expression 3 - ETC

Specifying a submaster’s page
You may specify the page to which you record submasters. For example,
if page 1 is loaded, you can record a submaster to page 2. To do so, follow
these steps:
Keystrokes:
1. Create a look in Stage.
Action:
2. Press [Record] [Sub]. Prompt reads:
To record submaster, press BUMP
or select number and press ENTER
To cancel, press CLEAR
3. Press [Page] [2]. Prompt reads:
Select page on which to record
submaster, then press submaster
bump button
4. Press submaster 6’s bump
button.
Current levels are recorded into
submaster 6 on submaster page 2
Using Except to record a submaster
The console allows you to program a submaster containing all the current
levels on stage except for those contributed by a specific cue, group, or
another submaster. 5
This example illustrates how you record a submaster without including
levels contributed by the specified submaster.
Keystrokes:
Action:
1. Press [Stage]. Selects Stage display mode
2. Select desired channels
and set channel levels.
3. Press [Record] [Sub]. Prompt reads:
To record submaster, select number
and press ENTER
To cancel, press CLEAR
4. Press [5]. Selects submaster 5 to be recorded
5. Press [Except] [Sub] [3]. a Instructs that levels raised by
submaster 3 be ignored
Prompt reads: Select excepted
submaster number
6. Press [Enter]. Records submaster 5 minus
submaster 3’s levels
a.
Press [Cue] or [Group] in place of [Sub] in step 5 to leave out
the channels supplied by a cue or group.
5.
[Except] will not work with effect cues or effect submasters.
168 Chapter 13 Submasters