Expression 3 - ETC

Moving time code events
Follow this procedure to move a selected event or range of events from
one code time to another. The event will move to the new time when you
sort the event list or leave the Time Code Events display.
Keystrokes:
1. Press [S7] until [S3] reads
Move Event.
Actions:
2. Press [S3], Move Event. Prompt reads:
Select event number(s) to move,
then press ENTER
To cancel, press CLEAR
3. Press [1] [Thru] [5] [Enter]. a Selects events 1 through 5 to move
Prompt reads:
To move selected event(s), select
time and press ENTER. To cancel,
press CLEAR
4. Press [Time] [Time]
[Time] [5].
Selects five minutes for the first event
to move
5. Press [Enter]. Copies event 1 to a new event starting
at the five minute point; the rest of the
events maintain their original
relationship in time
a. To move a single event, you may also use the arrow keys to
highlight the code time for the event you want to move, then
press [+] or [–] until the new code time is displayed in the
keypad prompt window, and press [Enter]. Or, use the keypad
to enter the new time, then press [Enter].
Expression 3 User Manual, v.3.1 305