Expression 3 - ETC

Playing a backup look
Playing a backup look brings up the recorded look on stage. You may play
back a backup look from the console or from a CEM.
Only one backup look may be on stage at a time. If there is a backup look
on stage when you bring up a new one, the second look replaces the first.
Up and down fade times for backup looks are five seconds. They cannot
be modified.
To use the console to play a recorded backup look, follow these steps:
Keystrokes:
Action:
1. Press [Setup]. Selects Setup display
2. Select [9], ETCLink
Functions, and press
[Enter].
Selects ETCLink Functions menu
3. Press [1], Dimming
System Status, [Enter].
Selects Dimming System Status
display
4. Press [S2], Play Backup. Prompt reads:
Select backup look to play, then
press ENTER (Enter 0 to return to
normal operation)
5. Enter the backup look
number (1-32) and press
[Enter]. a
Advisory reads:
Play Backup processing has
completed. Press [Clear] to
continue.
a. To clear a playing backup look, enter [0] in step 5 as the
backup look number. The currently playing backup look will be
cleared from the stage.
278 Chapter 23 Dimmer monitoring