Expression 3 - ETC

Deleting groups
Delete a group from memory in the Stage, Blind or Fader displays. 28
Deleting a group has no effect on any cues, groups, submasters or focus
points into which the deleted group was previously recorded.
Delete a group in Stage as follows:
Keystrokes:
Copying groups
Actions:
1. Press [Stage]. Selects Stage display
2. Press [S7], More
Softkeys, [S6], Delete,
[Group].
Prompt reads:
To delete group, press ENTER
To cancel, press CLEAR
3. Press [2]. Enters group number to delete
Corner reads: Group 2
4. Press [Enter] [Enter]. Group 2 is deleted from your show
You may copy a group in Stage or Blind, with small differences in the
procedure and prompts that occur. The following procedure illustrates
how to copy a group in Stage.
Keystrokes:
Actions:
1. Press [Stage]. Selects Stage display
2. Press [Group]. Prompt reads:
Group mode – Select group number
to use as group
3. Press [1]. Enters the number of the group you
wish to copy
Corner reads: Group 1
4. Press [Full]. Prompt reads:
Group mode – Press AT or use wheel
or trackpad to alter levels, or select
channel numbers to edit
5. Once the group is
displayed, press [Record]
[Group]. a
Prompt reads:
To record group, select number and
press ENTER
To cancel, press CLEAR
6. Press [5] [Enter]. Enters the number of the new group
and completes the Copy.
Corner reads: Group 5
a. To copy a group’s channels and levels to a cue or a
submaster, press [Cue] or [Sub] in place of [Group] in step 5.
28.
You can delete all groups at once with the Clear Groups option from
the Clear Functions menu. See Clear and reset options, page 263.
Expression 3 User Manual, v.3.1 143