Expression 3 - ETC

Editing a multipart cue
Once you have created a multipart cue, you can add or delete parts, add
or delete channels from the parts, change channel levels, or change fade
and wait times. Except for Update, all multipart cue editing is done in
Blind.
Deleting a part from a multipart cue
Deleting a part from a multipart cue is the reverse of creating a multipart
cue from a standard cue. When a part is deleted, the channels in the
deleted part do not leave the cue but transfer to part 8, where they can be
reassigned if desired. Channel levels are unaffected.
Follow these steps to delete part 1 from a multipart cue in Blind:
Keystrokes:
Action:
1. Press [Blind]. Selects Blind display mode
2. Press [Cue] [4]. Selects the cue
3. Press [Part] [1]. Selects the part
4. Press [S6], Delete Part. Prompt reads:
To delete part, press ENTER –
Delete part & tracking, press TRACK
+ ENTER
To cancel, press CLEAR
5. Press [Enter]. a
Prompt reads:
To confirm, press ENTER
To cancel, press CLEAR
6. Press [Enter]. Deletes part 1 from cue 4
a. If the part to be deleted has tracking channels and you want
those tracking channels removed from subsequent cues,
press [Track] before [Enter].
Expression 3 User Manual, v.3.1 121