Expression 3 - ETC

Clear functions
Each option on the Clear Functions menu erases information regarding a
console function from the console’s memory. If that information is saved
in a show on a diskette, it can be restored to the console. Otherwise, the
information is lost permanently.
Warning: Be certain to save your shows on disk before erasing
information you may need in the future. See Chapter 20 Diskette
functions, page 251, for information about saving shows.
All clear options are located on the Clear Functions menu. To display the
menu, press [Setup], then select [4], Clear Functions, and press [Enter].
The console displays the Clear Functions menu illustrated below.
Clear and reset procedure
Follow the procedure below for all clears and resets. This example shows
the prompts for the Clear Show option from the Clear Functions menu.
Use this procedure for all clear and reset options, varying as directed by
the onscreen prompts.
Keystrokes:
Action:
1. Press [Setup]. Displays Setup menu
2. Press [4], Clear Functions,
[Enter].
3. Press [1], Clear Show,
[Enter]. a
Displays Clear Functions menu
Prompt reads: Select function
number, then press ENTER
Prompt reads:
To clear show data, press ENTER
To cancel, press CLEAR
4. Press [Enter]. Show cleared. Returns to Stage
display mode
a.
Press softkey [S1], Reset System, here to erase all show
information from the console, reset to a 1-to-1 patch and reset
the system, options and configuration to factory defaults.
262 Chapter 22 Clear functions