Expression 3 - ETC

Modifying cues or submasters
You can use groups to modify cues or submasters. In the illustration
below, a submaster is modified by a group. If any of this group’s channels
are already in the submaster, the levels of those channels are modified to
match the levels in the group. If the group has channels not already in the
submaster, those are added to the submaster.
Keystrokes:
Action:
1. Press [Blind]. Selects Blind display mode
2. Press [Sub] [2]. Prompt reads:
Select submaster number
To select submaster type, press
TYPE
3. Press [Group] [3]. Selects group 3’s channels
Prompt reads: Group mode –
To recall a group, select the number
and set to a level
To create or modify a group, select
the number and press ENTER
4. Press [At] [5][0]. Group’s channels are set proportionally
to 50%
Prompt reads:
Group mode – Enter intensity
5. Press [Record]. Prompt reads:
To record submaster, press BUMP
or select number and press ENTER
To cancel, press clear
6. Press [Enter] to re-record
the modified submaster.
Records submaster 2 as modified by
group 3’s channels
Expression 3 User Manual, v.3.1 145