Expression 3 - ETC

Printer options
Before you begin printing, verify that your printer is installed correctly and
that it is turned on. For instructions on installing printers, see Installing a
printer, page 337.
All print options are located on the Print Functions menu. To display the
menu press [Setup], then select [5], Print Functions, and press [Enter].
The console displays the Print Functions menu illustrated below.
You may pause the current printing job or cancel it at any time while
printing. To stop the printer temporarily while it is printing, press [S2],
Pause Printer. The printer prints a few more lines, then stops and waits.
Press [S2] again to resume printing. To cancel a print job, press [S1], Stop
Printer. The printer prints a few more lines, then stops.
Printing procedure
Follow the procedure below for all printouts. This example shows the
prompts for the Print Stage Display option on the Print Functions menu.
Use this procedure for all printout options, varying as directed by the
onscreen prompts.
Keystrokes:
Action:
1. Press [Setup]. Displays Setup menu
2. Press [5], Print Functions,
[Enter].
3. Press [1], Print Stage
Display, [Enter].
Displays Print Functions menu
Prompt reads:
To confirm, press ENTER
To cancel, press CLEAR
4. Press [Enter]. File sent to the printer
258 Chapter 21 Printing