Expression 3 - ETC

Deleting focus points
Delete a focus point from memory in the Stage, Blind or Fader displays. 32
If any cues, groups or submasters are linked to the deleted focus point,
the links are retained but the levels of the linked channels are set to zero.
Delete a focus point in Stage as follows:
Keystrokes:
Copying focus points
Actions:
1. Press [Stage]. Selects Stage display
2. Press [S7], More
Softkeys, [S6], Delete,
[Focus Point].
Prompt reads:
To delete focus point, press ENTER
To cancel, press CLEAR
3. Press [2]. Enters focus point number to delete
Corner reads: Focus 2
4. Press [Enter] [Enter]. Focus point 2 is deleted from your
show
You may copy a focus point in Stage or Blind with small differences in the
procedure and prompts. Proceed as follows in Stage:
Keystrokes:
Actions:
1. Press [Stage]. Selects Stage display
2. Press [Focus Point]. Prompt reads:
Group mode – Select focus point to
use as group
3. Press [1]. Selects focus point 1 to copy
Corner reads: Focus 1
4. Press [Full]. Prompt reads:
Group mode – Press AT or use wheel
or trackpad to alter levels, or select
channel numbers to edit
5. Once the focus point is
displayed, press [Record]
[Focus Point]. a
Prompt reads:
To record focus point, select number
and press ENTER
To cancel, press CLEAR
6. Press [5] [Enter]. Enters the number of the new focus
point and completes the Copy.
Corner reads: Focus 5
a. To copy a focus point’s channels and levels to a cue or a
submaster, press [Cue] or [Sub] in place of [Focus Point] in
step 5.
32.
You can delete all focus points at once with the Clear Focus Points
option from the Clear Functions menu. See Clear and reset options,
page 263.
Expression 3 User Manual, v.3.1 155