Expression 3 - ETC

Updating a recorded submaster
You need not bring up the submaster to update it. The following
procedure illustrates how to update any recorded submaster.
Keystrokes:
Action:
1. Press [Stage]. Selects Stage display mode
2. Press [S8], Fixture, [1]
[Thru] [8], [Full].
Selects fixtures 1 through 8 and sets
their intensities to full
3. Set the pan and tilt levels. a Sets levels for fixture 8 pan and tilt
attributes
4. Press [S2], Update, [Sub]. Prompt reads:
To update submaster, press BUMP
or select number and press ENTER
Press 0 + ENTER to select all
submasters (only those channels
already in sub)
5. Press [Page] [3]. Selects submaster page 3
Prompt reads:
Select submaster page to update
and press ENTER or submaster
BUMP
To cancel, press CLEAR
6. To restrict channels in the
update, use Only as
explained under The Only
command, page 8. b
7. Press submaster 6’s bump
button.
a.
Use your mouse or equivalent pointing device, if available.
b.
Optional step.
Selects channels to update
Prompt reads:
Select channel number(s) -
To cancel, press CLEAR
(Press 0 to reselect all non-zero
channels)
Updates submaster 6 on submaster
page 3
Expression 3 User Manual, v.3.1 173