Expression 3 - ETC

Submaster List
The Submaster List on the command monitor allows editing of bump
button status; upfade, downfade and dwell times; type; rate and label.
This list also allows you to delete submasters from your show.
Enter the command monitor’s Submaster List from softkeys in either
Blind or Stage. In Blind, press [Sub] [S2], Sub List. In Stage, press [Sub]
[S7], More Softkeys, [S2], Sub List.
The first 17 submasters are shown initially in the Submaster List. Page
through the rest of the submasters using the [S5], Next Page and [S4],
Previous Page, keys.
Unrecorded submasters are shown with a gray number in the Sub (first)
column. A recorded pile on submaster has a green Sub number; an
inhibitive submaster has a red Sub number; an effect submaster has a
white Sub number. The Submaster List on the playback monitor has the
same color coding.
The currently selected submaster page is shown following the words
“Sub Page” at the top left of the display. Change submaster pages as
explained in Specifying a submaster’s page, page 168. In general, the
Page Loaded shown in column two will agree with Sub Page except for
those submasters that were on stage when the current Sub Page was
selected (see Submaster pages, page 160). The column marked “%”
shows the submaster’s current level on stage as determined by its slider.
Expression 3 User Manual, v.3.1 181