Expression 3 - ETC

Updating focus points
Update allows you to modify previously recorded cues, groups,
submasters or focus points in Stage or Fader. Update takes levels from all
captured and selected channels, and those selected may be restricted
with the Only command. 31
Updating an active focus point
The following procedure illustrates how to update a focus point that has
been placed on stage.
Keystrokes:
Action:
1. Press [Stage]. Selects Stage display mode
2. Press [Focus Point] [4]
[Full].
3. Modify channel levels as
desired.
Places focus point 4 on stage at full
Sets focus point levels or selects
additional channels and sets their
levels
4. Press [S2], Update. Prompt reads:
To update cue, select number and
press ENTER
To cancel, press CLEAR
5. To restrict channels in the
update, use Only here. a
6. Press [Focus Point] [4]
[Enter].
Restricts channels in update
Prompt reads:
Select channel number(s) -
To cancel, press CLEAR
(Press 0 to reselect all non-zero
channels)
Updates focus point 4
a. If not restricted with Only, all captured and selected channels
are included in the update.
31.
For an explanation of captured channels, see Channel modes, page
56. For an explanation of Only, see The Only command, page 8.
Expression 3 User Manual, v.3.1 151