Expression 3 - ETC

Pulling channels in Blind
If you insert in Blind using [Track], you can get a start on a new cue by
using levels already defined in the previous cue. You can then add
channels or modify levels in the new cue. From that point on, you can use
either [Record] or [Track] analogously to the procedures explained above,
depending upon whether or not you want the channels in the inserted cue
to track into subsequent cues.
Press the following keys to insert cue 2.5 in Blind by pulling in levels from
previous cue 2.0 and adding channel 5 at 70 percent. Note that the new
cue in this example will track into subsequent cues as well because of the
second use of [Track] in step 5.
Keystrokes:
Actions:
1. Press [Blind] [2][.][5]. Displays empty cue 2.5
Prompt reads:
Select cue number
To select cue type, press TYPE
2. Press [Track] [Enter]. Pulls in previous cue’s channels
3. Press [Channel] [5] [At]
[5][0].
Adds channel 5 at 50 percent
Prompt reads:
Select channel numbers
4. Press [Track]. Prompt reads:
To record cue & tracking, select
number and press ENTER
To cancel, press CLEAR
5. Press [Enter]. Records cue 2.5
The following illustration shows this insertion and subsequent tracking.
Chan 1 Chan 2 Chan 3 Chan 4 Chan 5
Cue 1 50
Cue 2 50 FF 00
Cue 2.5 50 FF 00 70
Cue 3 50 FF FF 70
Cue 4 25 FF FF FF 70
Cue 5 00 00 00 00 70
Expression 3 User Manual, v.3.1 113