Expression 3 - ETC

Editing real time programs
Once you have created a real time program, you can easily make changes
to it and others in the Real Time Programs display. 7 Press [↑] or [↓] to
move from one program to the next. Press [←], [→] to move through
program options.
Deleting real time programs
You can delete all real time programs as one of the Clear Functions
reached from the Setup menu (option 12). Alternatively, you can delete
one program at a time in the Real Time Programs display.
Delete a real time program with the following procedure:
Keystrokes:
Action:
1. Press [Setup]. Selects Setup display mode
2. Press [1][2] [Enter]. Selects Real Time Programs display
3. Press [S7], More
Softkeys, [S6], Delete
Program.
Prompt reads:
Select program number(s) to
delete, then press ENTER
To cancel, press CLEAR
4. Press [5] [And] [6] [Enter]. Selects programs 5 and 6 to delete
Prompt reads:
To confirm, press ENTER
To cancel, press CLEAR
5. Press [Enter]. Deletes programs 5 and 6
Inserting real time programs
Keystrokes:
Action:
1. Press [Setup]. Selects Setup display mode
2. Press [1][2] [Enter]. Selects Real Time Programs display
3. Press [S7], More
Softkeys, [S1], Insert
Program, [4] [Enter].
Specify insertion at program 4
Prompt reads:
Select program number to insert,
then press ENTER
To cancel, press CLEAR
4. Press [2] [Enter]. Inserts two new programs starting
with number. All following programs
are renumbered
7.
While editing a real time program, you can run it simultaneously
because the editing procedure is buffered in memory. The changes
are recorded once you leave the Real Time Programs display and or
sort the programs. See Sorting/recording real time programs, page
293.
292 Chapter 24 Control interfaces