Expression 3 - ETC

Deleting time code events
Follow these steps to delete time code events: 13
Keystrokes:
Actions:
1. Press [S7] until [S6] reads
Delete Event.
2. Press [S6], Delete Event. Prompt reads:
Select event number(s) to delete,
then press ENTER
To cancel, press CLEAR
3. Press [5] [And] [6] [Enter]. Enters events 5 and 6 to delete
Prompt reads:
To confirm, press ENTER
To cancel, press CLEAR
4. Press [Enter] to delete the
event or [Clear] to leave it
unchanged.
Inserting time code events
Insert a time code event into an existing time code program with this
procedure:
Keystrokes:
Actions:
1. Press [S7] until [S1] reads
Insert Event.
2. Press [S1], Insert Event. Prompt reads:
Select event number to insert, then
press ENTER
To cancel, press CLEAR
3. Press [4] [Enter]. a
Prompt reads:
Select number of events to insert,
then press ENTER
To cancel, press CLEAR
4. Press [2]. Indicates that you wish to insert two
new events
Corner reads:
Insert 2
5. Press [Enter]. New events 4 and 5 are inserted; all
following events are renumbered
a. The new event(s) will be inserted before event 4.
13.
The Clear Time Code Events menu option on the Clear Functions
menu allows you to delete all recorded time code events. To do so,
press [Setup] [4] [Enter] [1][3] [Enter] [Enter].
Expression 3 User Manual, v.3.1 303