Expression 3 - ETC

Recording cues with Link and Follow
When you record a cue, it automatically becomes part of the Cue List. The
Cue List is a list of all cues, organized in numeric sequence. Normally,
when you press [Go] to execute cues, the console plays them back in the
sequence in which they appear in the Cue List. [Link] allows you to modify
the sequence in which cues play back. [Follow] allows you to play back
multiple cues automatically.
Link
[Link] allows you to play back cues out of sequence by linking them
together. If you link cue 10 to cue 1, then cue 10 follows cue 1.
Follow these steps to record a linked cue. 13
Keystrokes:
Action:
1. Press [Stage] or [Blind]. Selects display mode
2. [Cue] [1]. Selects cue 1
3. Press [Link]. Prompt reads:
To link to cue, select cue number
To link to macro, press ENTER
MACRO
4. Press [1][0] [Enter]. a
Links cue 10 to cue 1. After you play
cue 1, press [Go] to playback cue 10
a. Press [Clear] in this step to remove an existing link.
13.
You can also link macros to cues. For more information, see Linking a
macro to a cue, page 97.
94 Chapter 7 Cues