Expression 3 - ETC

Editing channel levels
Regardless how channels were added to the effect, channels may be
individually edited in the effect, either individually or in ranges. Levels may
be set with the keypad or with reference to focus points.
Follow the procedure below to edit channel levels in a recorded effect cue
that has at least 5 steps. Levels are set with reference to a focus point.
Keystrokes:
Actions:
1. Press [Blind] [Cue] [1]. Go to the Blind Effects display
Prompt reads:
Select cue number
To write effect, press STEP
2. Press [S1], Step, [5]. Specifies step 5
Select step number(s)
(To clear step(s), select step
number(s), then press CLEAR)
3. Press [Chan] [5] [And] [8]. Selects channels 5 and 8
Prompt reads:
Select channel number(s) and press
ADD CHANNELS to add to step(s),
or press AT to edit existing channel
level(s)
4. Press [At] [Focus Point] [1]
[Enter].
5. Repeat steps 2-4 to set
levels in other steps.
Alternatively, use the up/
down arrow keys to move
to other steps for editing.
Sets levels of channels 5 and 8 to their
levels in focus point 1
Continue to edit channels
6. Press [Record] [Enter]. Records your changes to the cue
Adding channels
Add additional channels to an effect step using any of the procedures
used to add channels when the step was created. See Creating an effect
in Blind, page 208.
216 Chapter 16 Effects