Expression 3 - ETC

Updating groups
Update allows you to modify previously recorded cues, groups,
submasters or focus points in Stage or Fader. Update takes levels from all
captured and selected channels, and those selected may be restricted
with the Only command. 27
Updating an active group
The following procedure illustrates how to update a group that has been
placed on stage.
Keystrokes:
Action:
1. Press [Stage]. Selects Stage display mode
2. Press [Group] [4] [Full]. Places group 4 on stage at full
3. Modify channel levels as
desired.
Sets group levels or selects additional
channels and sets their levels
4. Press [S2], Update. Prompt reads:
To update cue, select number and
press ENTER
To cancel, press CLEAR
5. To restrict channels in the
update, use Only here. a
Restricts channels in update
Prompt reads:
Select channel number(s) -
To cancel, press CLEAR
(Press 0 to reselect all non-zero
channels)
6. Press [Group] [4] [Enter]. Updates group 4
a. If not restricted with Only, all captured and selected channels
are included in the update.
27.
For an explanation of captured channels, see Channel modes, page
56. For an explanation of Only, see The Only command, page 8.
140 Chapter 11 Groups