Expression 3 - ETC

Creating cues
Cues may be created in the cue spreadsheet with or without tracking
enabled. After entering the cue spreadsheet as explained on the previous
page, create a cue with the tracking option enabled as follows.
Keystrokes:
1. Press [S7], Enable
Tracking. a
Editing cues
Follow the procedure above for creating a cue in spreadsheet except
press [S1], Select Cue, rather than softkey [S2] in step 2.
Deleting cues
Actions:
Sets tracking enabled
2. Press [S2], Create Cue. Prompt reads:
To create a new cue, select cue
number and press ENTER
To cancel, press CLEAR
3. Press [5] [Enter]. Selects cue 5. Prompt reads:
Select channel(s)
4. Press [5] [Thru] [1][0]. Selects channels to include
5. Press Full]. Sets channels 5 through 10 to full
Prompt reads:
Enter intensity
6. Repeat steps 4-5. Continue selecting channels and
setting levels until done
a.
Use either the [Track] key or the cue spreadsheet softkey to
toggle the tracking mode. Press once or twice until the yellow
message in the upper right corner of the spreadsheet display
confirms your choice.
In the cue spreadsheet, delete one or more cues as follows.
Keystrokes:
Actions:
1. Press [S6], Delete Cue. Prompt reads:
To delete cue(s), select number(s)
and press ENTER
To cancel, press CLEAR
2. Press [5] [And] [6] [Enter]. Selects cues 5 and 6
Prompt reads:
To confirm, press ENTER
To cancel, press CLEAR
3. Press [Enter] [Enter]. Deletes cues 5 and 6
188 Chapter 14 Command display lists and spreadsheets