Expression 3 - ETC

Using Update to modify fade rate
You may also use the Update function to record manually modified fade
rates into cues.
Follow these steps to update a rate for a cue running in a fader:
Keystrokes:
1. Press [Rate] key for the
fader in which the cue is
running.
2. Move rate wheel to adjust
fade rate.
Action:
Activates rate control
Fades are placed under control of the
rate wheel. The Fader Status window
shows the current rate
3. Press [S2], Update. Prompt reads:
To update cue, select number and
press ENTER (TRACK + ENTER for
tracking) (Press ONLY + ENTER to
update only those channels already
in cue)
4. Press [Enter]. New rate is recorded into cue
Deleting cues
You can delete a cue in either Blind or Stage. Follow the procedure below
to delete a cue in Blind. Follow the same procedure in Stage except press
[S7], More Softkeys, after pressing [Stage] to display the Delete key as
softkey [S6].
Keystrokes:
Action:
1. Press [Blind]. Selects Blind mode
2. Press [S6], Delete Cue. Prompt reads:
To Delete cue, press ENTER - Delete
cue and tracking, press TRACK +
ENTER
To cancel, press CLEAR
3. Enter number of cue to
delete. a
Selects cue to delete
4. Press [Enter]. b
Prompt reads:
To confirm, press ENTER
To cancel, press CLEAR
5. Press [Enter]. Deletes cue
a. Optional if deleting the currently selected cue.
b. To delete the cue and any channels that track, press [Track]
before [Enter]. For more information on tracking, see Chapter
8 Track.
104 Chapter 7 Cues