Expression 3 - ETC

About Channel
The About Channel display gives you information about the
characteristics, patch and use of individual channels. It can be displayed
while in any other display. For similar information about dimmers, see
About Dimmer, page 51.
Go to the About Channel display as follows.
Keystrokes:
Action:
1. Press [About] [Channel]. Prompt reads:
About: Select channel number, then
press ENTER
2. Press [6]. Keypad corner reads:
Chan 6
3. Press [Enter]. About Channel window is displayed. a
a. Press [Clear] to remove the window.
Features of the display
Following is an About Channel display for a channel patched to a fixture
attribute. When a channel is either unpatched or patched to a conventional
light, the Fixture and Type fields shown below are replaced by a Link field.
• Label Name, if any, assigned to the channel in
the Channel Attributes display.
• Fixture (Only for channels patched to a fixture)
Number and name, if any, assigned to
the channel in Fixture Patch.
• Type (Only for channels patched to a fixture)
Name of the personality used for this
fixture.
• Link Link number, if any.
• Device If channel is patched to a fixture, Device
shows the assigned fixture attribute. If
channel is on a Link List, Device shows
which wheel is assigned.
Expression 3 User Manual, v.3.1 65