Expression 3 - ETC

Adding channels
Once you have an inhibitive submaster, use the following procedure in
Blind to add channels to it.
Keystrokes:
Actions:
1. Press [Blind]. Selects Blind display
2. Press [Sub] [1][5] [Enter]. Selects sub 15. All channels in sub 15,
if an inhibitive submaster, are displayed
with “IN” in their level fields.
Prompt reads:
Select channel numbers
3. Press [5][2] [Enter]. Adds channel 52. The channel is shown
with “IN” in its level field. Specifies sub
is inhibitive
4. Press [Record][Sub]
[Enter].
Records sub 15 with the added channel
Deleting channels
Channels may be deleted from an inhibitive submaster either in Stage or
Blind. Follow the procedure below to delete in Blind.
Keystrokes:
Actions:
1. Press [Blind]. Selects Blind display
2. Press [Sub] [1][5] [Enter]. Selects sub 15. All channels in sub 15,
if an inhibitive submaster, are displayed
with “IN” in their level fields.
Prompt reads:
Select channel numbers
3. Press [5][2] [Clear]. Clears channel 52.
4. Press [Record][Sub]
[Enter].
Records sub 15 without channel 52
170 Chapter 13 Submasters