Expression 3 - ETC

Park
Press [Park] to bring up the Park display. The Park display lists parked
dimmers on the top half of the screen, and parked channels on the lower
half, along with their parked levels.
Display name
Keypad corner
Parked
Dimmer
area
Parked
Channel
area
Prompt area
Softkeys
The Park display is actually two, separate displays. The top section shows
up to 36 dimmers and the level at which each is parked; the bottom
section shows up to 36 channels and the level at which each is parked. If
a channel is parked at a focus point, as shown above, the level is shown
below the channel number as well as the focus point number, in that
order.
You can move through either the dimmer or the channel sections of the
Park display separately. Use the Previous Page and Next Page softkeys to
jump one whole display back or jump one whole display forward. For
example, if you have 50 channels parked and the first 36 are displayed,
press [S5, Next Page, to display channels 37 through 50.
You can also jump through either section of the display as if you were
assigning a level. The display automatically scrolls to show the selection.
For example, if you have 50 dimmers parked and want to show dimmer
48, press [Dim] [48] [At] to bring up a display that shows dimmer 48.
18 Chapter 2 Monitor displays