Expression 3 - ETC

Captured channels in Patch
The console lets you select and capture channels without returning to
Stage mode. This allows you to bring channels up on stage to view the
proportional settings of dimmers assigned to a channel while you set
them.
To select channels from the patch screen, follow these steps:
Keystrokes:
Action:
1. Press [Patch]. Selects Patch display
2. Press [Channel]. Prompt reads:
Select channel numbers
3. Use the keypad to enter
the desired channel
number(s) Use [And] and
[Thru] if you want to select
more than one channel.
4. Press [Full] to set channel
level at 100 percent,
[Level] to set channel at
the default level, or press
[At] and enter a level
setting.
5. Press [Rel] to release
channel(s).
Prompt reads:
Select channel numbers
Selected channels are set at the
indicated level
Expression 3 User Manual, v.3.1 49