Expression 3 - ETC

Chapter 15
Park
Park allows you to set channels, dimmers and fixtures at levels that are
maintained on stage. These levels are not recorded into cues and are
independent of most other instructions, except as follows:
• [Blackout] will turn off parked dimmers, channels and fixtures unless
they are independent channels.
• Channels parked at a focus point will update the parked levels if the
levels change in the focus point.
If a dimmer is parked and the channel that controls it also is parked, the
dimmer’s parked level takes priority over the channel’s parked level. If the
dimmer is then unparked, the channel will revert to the channel’s parked
level. When a dimmer, channel or fixture is unparked, the levels revert to
the level the console is currently assigning to it.
The following options are described in this chapter:
• Parking and unparking dimmers
• Parking and unparking channels
• Parking and unparking fixtures
• Parking channels and fixtures at a focus point
• Parking and unparking cues, submasters, groups and focus points
Expression 3 User Manual, v.3.1 197