Expression 3 - ETC

Editing focus points
You may edit a focus point in the focus point spreadsheet. Follow all steps
in the procedure under Creating a focus point on the previous page
except Press [S1], Select Focus in step 1.
Deleting in spreadsheet
After entering the focus point spreadsheet as explained on the previous
page, delete a focus point as follows.
Keystrokes:
Actions:
1. Press [S6], Delete Focus. Prompt reads:
To delete focus point(s), select
number(s) and press ENTER
To cancel, press CLEAR
2. Press [5] [And] [6] [Enter]. Selects focus points 5 and 6
Prompt reads:
To confirm, press ENTER
To cancel, press CLEAR
3. Press [Enter] [Enter]. Deletes focus points 5 and 6
Replacing channel level
As a convenient editing technique, you may specify a particular level to
change for a channel or number of channels. After entering the focus point
spreadsheet as explained on the previous page, replace channel level as
follows.
Keystrokes:
Actions:
1. Press [S1], Select Focus. Prompt reads:
Select focus point(s)
2. Press [5] [Enter]. Selects focus point 5
Prompt reads:
Select channel(s)
3. Press [5] [Thru] [1][0] [S3],
Replace Level, [5][0].
Selects channels 5 through 10 at level
50 to change
Prompt reads:
Select level to replace and press
ENTER
4. Press [Enter]. Prompt reads:
Select new level and press ENTER
5. Press [Full] [Enter]. Changes all channels in the range 5
though 10 with level 50 to level full
Expression 3 User Manual, v.3.1 195